ELECTRIC MOTORS
-
DetailsAUTHORIZED DISTRIBUTOR STOCKIST
CATALOG MOTOR FORTA 1 , CATALOG MOTOR FORTA 2 , CATALOG MOTOR FORTA 3 , CATALOG MOTOR FORTA 4 , FORTA EXPLOSION PROOF MOTOR
-
DetailsCATALOG BONFIGLIOLI => br_cat_bn_bc0020_r11_b
-
-
Details
Motovario
Motovario Helical Gear Reducers/Gearboxes
- TYPE: HA (Aluminum casing) (used to be known as PRC)
H (Cast Iron) - RATIO: From 1.33 up to 353.98
- POWER: Up to 5.5kW (HA)
Up to 45kW (H) - STYLE: Available with foot mounting, flange mounting or universal mounting
Motovario
Motovario Worm Gear Reducers/Gearboxes
- TYPE: NMRV (for sizes: 025, 030, 040, 050, 130 and 150)
NMRVPower (for sizes: 063, 075, 090, 110) - MATERIAL: Aluminum alloy (up to 110)
Cast iron (sizes 130 & 150) - RATIO: From 5 up to 100
- Available with flange for Motor coupling, hollow input and output
- Options: Torque arm, output flange, output shaft
-
-
-
DetailsProduct InformationTOSHIBA AS1 Series
The AS1 series adjustable speed drive adds to the strong record Toshiba holds in creating adaptable, consistent, and powerful drives. Manufactured for functionality for the end user, the AS1 uses advanced technology to provide a powerful, reliable, and rugged drive with flexible application control.
Highlights
- 100% Continuous Overload Rating, 150% for 60 Seconds
- Eight Programmable Discrete Inputs with Selectable Sink or Source Logic
- Three Programmable Discrete Outputs: One Form-C Contact and Two Open Collector Outputs
- Three Programmable Analog Inputs: One 4 to 20 mA, One 0 to 10 VDC Input, and One ¤10 VDC Input
- Two Programmable Analog Outputs: One 4 to 20 mA or 0 to 10 VDC and One 0 to 1 mA Output or 0 to 7.5 VDC
- Two-Wire/Four-Wire RS485
- Auto-Restart Operation/Catch a Spinning Motor
- Improved PID Algorithms
- Built-In EMC Filter
Standard Features
- NEMA 1 Enclosure with Additional Conduit Adapter
- Built-In Dynamic Breaking Drive Circuit up to 250 HP2
- Past Trip Monitoring: Stores the Last Four Faults in Succession, Along with Cumulative At-Trip Times
- EOI: Integral Seven-Segment LED Keypad
- Save, Restore, and Clone Multiple Drive Settings
- Ambient Temperature: 14° to 122°F (-10° to 50°C)
- Altitude: Up to 1000 Meters without Derate
- Humidity: 95% Non-Condensing
- Standards/Compliance: IEEE, UL Listed in US and Canada, CSA, NEMA, NEC, CE, NOM-117, C-TICK, and GOST
-
GEAR REDUCER
-
Details
AUTHORIZED DISTRIBUTOR STOCKIST
CATALOG MOTOR FORTA 1 , CATALOG MOTOR FORTA 2 , CATALOG MOTOR FORTA 3 , CATALOG MOTOR FORTA 4 , FORTA EXPLOSION PROOF MOTOR
-
Details
1 BONFIGLIOLI VF – Worm gears 2 BONFIGLIOLI TA – Shaft mounted speed reducers 3 BONFIGLIOLI S – Single reduction helical gearmotors 4 BONFIGLIOLI RAN – Bevel gears 5 BONFIGLIOLI HDP – Parallel shaft gear units 6 BONFIGLIOLI F – Shaft mounted gearmotors 7 BONFIGLIOLI C – In-line helical gearmotors 8 BONFIGLIOLI AS – In-line gearmotors 9 BONFIGLIOLI A – Helical-bevel gearmotors 10 BONFIGLIOLI 300 – Planetary drives -
Details
Motovario
Motovario Helical Gear Reducers/Gearboxes
- TYPE: HA (Aluminum casing) (used to be known as PRC)
H (Cast Iron) - RATIO: From 1.33 up to 353.98
- POWER: Up to 5.5kW (HA)
Up to 45kW (H) - STYLE: Available with foot mounting, flange mounting or universal mounting
Motovario
Motovario Worm Gear Reducers/Gearboxes
- TYPE: NMRV (for sizes: 025, 030, 040, 050, 130 and 150)
NMRVPower (for sizes: 063, 075, 090, 110) - MATERIAL: Aluminum alloy (up to 110)
Cast iron (sizes 130 & 150) - RATIO: From 5 up to 100
- Available with flange for Motor coupling, hollow input and output
- Options: Torque arm, output flange, output shaft
-
-
-
-
-
DetailsFEATURES
- DESIGN CONCEPTS: the combination of standardization and modularization allows interchangeability with international leading brands, while keeping structure rigidity and compactness.
- ENERGY EFFICIENCY: leveraging the advantage of high accuracy of helical gears, the reducers perform at 90% efficiency with higher stability and lower noise level.
- RATIOS COVERAGE: 1~3 stages of reduction provides a wide range of ratio accommodation from 1/1.3~1/27788.
- LOADING CAPACITY: available with power ranges from 1/4hp up to 150hp depending on different requirements and applications.
- TENSILE STRENGTH: pinion and gears are made with 20CrMo alloy steel plus carburizing heat treatment to enhance performance; the input pinion is equipped with double bearing support to provide stability at high speed.
- COMPLETE SERIES: vertical and horizontal mounting along various input mechanism ensure the products meet a wide range of applications.
- INSTALLATION FLEXIBILITY: all models are designed for a choice of mounting position (M1~M6) specified by customers.
- APPEARANCE AESTHETICS: the products are designed with modern exterior while maintaining high rigidity.
Size Output-Shaft [mm] M2 [Nm] Max I – Min I – Max R17 20 85 4.05 79.85 R37 25 218 4.2 119.93 R47 30 332 4.05 120.20 R67 35 495 3.96 123.20 R77 40 634 4.03 116.13 R87 50 1803 4.06 117.17 R97 60 2903 4.00 115.43 R107 70 5468 4.00 115.50 R137 90 7997 4.04 117.25 R147 110 11368 4.16 117.29 R167 120 17346 3.93 178.17
PUMPS
-
-
DetailsSanitary Centrifugal Pump – Alfa Laval
Alfa Laval, sebagai salah satu produsen sanitary equipment terbesar di dunia mempunyai beberapa produk centrifugal pump dan rotary lobe pump. Untuk centrifugal pump dikelompokan dalam 3 series pompa yaitu LKH, SolidC dan i-CP
-
-
-
-
DetailsGEA_Hilge_Contra_Brochure_A4_EN_V012015
GEA_Hilge_durietta 0_Brochure_A4_EN_V012015
GEA_Hilge_Euro_HYGIA_Brochure_A4_EN_V012015
GEA_Hilge_FB_HYGIA_Brochure_A4_EN_V012015
GEA_Hilge_MAXA_Brochure_A4_EN_V012015
GEA_Hilge_NOVAlobe_Brochure_A4_EN_V012015
GEA_Hilge_NOVAlobe_Poster_A4_EN_Web_V022015
-
-
-
-
DetailsEtanorm – End Suction Pumps
Product Description:
Design
Horizontal, long-coupled, single-stage volute casing pump with ratings and main dimensionsto EN 733 in back pull-out design, with replaceable shaft sleeves / shaft protecting
sleeves and casing wear rings. Design to ATEX.
Application
Spray irrigation, irrigation, drainage, district heating, water supply systems,heating and air-conditioning systems, condensate transport, swimming pools,
fire-fighting systems, handling of hot water, cooling water, fire-fighting water, oil,
brine, drinking water, brackish water, service water, etc.
-
-
DetailsGRUNDFOS
Unilift Sewage Domestik Seri
SQ Submersible Domestik Seri
SP Submersible Grundfos
CR Seri Grundfos
-
DetailsG series mechanical diaphragm metering pump
The characteristics of Variable eccentric mechanism adjustment, gentle pulsation
• various materials and pump head structure optional -PVC, PVDF, 316SS, high viscosity and slurry pump head
• mechanically driven PTFE diaphragm
• material side diaphragm protector, easy to pass through
• three automatic control modes, suitable for various control needs
• manual/electric stroke adjustment is optional
• adjustable stroke 0~100% (automatic/manual)
• the stroke can be adjusted under both static and dynamic conditions
• maximum liquid temperature 40℃*
• steady-state accuracy: ±2% (10%~100%)
• maximum suction: 3m water column *
• maximum suction pressure: 20m water column
• optional dual diaphragm head construction
• recommended maintenance cycle: ≤1.0MPa4000h 0.7 or less MPa8000h, Automatic control mode selection
• electric stroke controller
-
-
-
Details
Specification and Application
� Pump casing is in nice linearty design with stiffeners. The two bearings are located at a short distance and the shaft is acordingly shortened, so that shaft, bearings and mechanical seals would be kept in a long service life. Shaft is fully sealed away from medium, no erosion and high interchangeability. Close cisculate cooling system is applied to its inner seal housing, which makes SC pump simple in structure and easy to maintain.
� SC split-casing pumps are used far and wide in civil water supply, industry, construction, air-conditioning, irrigation, marine, fire fighting and power station.
Rotor Pump SC Discharge diameter
80 ~ 600 m�/hMax Capacity
2000 l/sMax Head
170 mMax pressure
Type Rated Flow Total Head 16 Bar standard, 25 Bar on request
[m�/h] [m]
SC 80 80 40 Max Temperature
SC 100 100 50 105�C
SC 125 200 70
SC 150 400 75
SC 200 500 100
SC 250 1000 100
SC 300 1500 110
SC 350 2000 80
SC 400 3000 70
SC 500 4000 80
SC 600 5000 70 -
-
DetailsOBL PUMP
OBL pump adalah produk pompa dari Italia, produk ini sangat populer untuk industry
- BOILERS Water Quality Control
- CHEMICAL
- MINING
- COOLING TOWERS Water Quality Control
- WATER TREATMENT Chemical Additivation
- PULP AND PAPER
-
DetailsGENERAL APPLICATION
- END SUCTION PUMPS
- ETAN
- CER
- CE
- CA Series
- CPEN
- CSA
- HORIZONTAL SPLIT CASE DOUBLE SUCTION PUMPS
- CDM
- MULTISTAGE PUMPS
- MMO
- MMK/L
- MHD
- MHG/MHB
- VERTICAL PUMPS
- SPV
- CSTV
- MMTV
- IS – ISV
- LF
- SUBMERSIBLE PUMPS
- SSC
- SWO
- SMIV
- SMSV
- TG DR
- TG DG
- TG AP
- CNS Series
- END SUCTION PUMPS
-
DetailsHe Warman® AH® pump is the world’s standard for heavy duties. A wide variety of impellers and shaft seals provide a perfect fit for a wide range of applications. The AH® pump provides excellent wear life while maintaining efficiency during the wear cycle providing the best total operating cost. The Warman® AH® pump, together with the Warman® MC series pump, provides a complete selection for most all duties in the mill. From cyclone feed to regrind, flotation and tailings, the Warman® AH® pump is the best choice.
Key features/benefits
- Bearing assembly – a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
- Liners-easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure moulded elastomer.
- Elastomer seal rings back all liner joints.
- Casing–Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.
- Impeller–front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and moulded elastomer impellers are completely interchangeable.
- Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
- Throatbush–wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
- One-piece frame – a very robust one-piece frame cradles the cartridge type bearing and shaft assembly.
- An external impeller adjustment mechanism is provided below the bearing housing for easy adjustment of impeller clearance
Applications
- Mill discharge
- Process pumps
- Low pressure tailings
Processes
- Slurry transportation
- Tailings Management
- Wet sand pumping
WATER METER
-
-
-
DetailsFLOWMETER FOR OIL AND WATER
-
-
DetailsSHM Hi-Flo Meters adalah flowmeter untuk air kotor (bisa juga untuk air bersih) dapat dilalui oleh semua partikel halus maupun padat dan tidak akan menyebabkan kemacetan pada sistem mekanikalnya, perawatannya sangat mudah. Dapat digunakan untuk air PDAM, air sungai, air tanah, limbah dll.
SHM sewage/waste flowmeter dilapisi dengan cat epoxy yang tahan terhadap karat dan cairan kimia sehingga dapat digunakan untuk jangka waktu yang sangat panjang. Dengan sistem penunjukkan analog maka tidak membutuhkan power source untuk flowmeter nya. Contact putaran registernya sistem magnetic sehingga memiliki akurasi yang sangat baik. Material display/registernya terbuat dari bahan kaca sehingga menjamin display yang sangat clear/bening, anti fogging (kabut), bebas dari kerusakan karena cuaca ekstrim (panas/dingin), serta anti retak karena usia.
SHM Hi-Flo Meters tersedia juga untuk media hingga 900C (Code : SHM-H90), dan flowmeter yang terbuat dari bahan stainless steel (SUS 304 dan SUS 316), dan juga unit yang bisa mengeluarkan signal pulse (dapat dipasang Data Logger). Flowmeter SHM sangat cocok digunakan untuk pengolahan limbah STP, WWTP pada hotel, mall, rumah sakit, PLN, tekstil, limbah sawit, industri makanan/minum, dll. Unit flowmeter ini harganya sangat terjangkau tersedia ukuran 2″ (DN50), 2.5″ (DN65), 3″ (DN80), 4″ (DN100), 5″ (DN125), 6″ (DN150). 8″ (DN200), 10″ (DN250) dan 12″ (DN300).
BELTING
-
DetailsWE SUPPLY FOR INDUSTRIAL SUCH AS CEMENT, CERAMICS, FOOD & BEVERAGES, OIL & GAS COMPANY Etc.
-
-
DetailsEstablished in November 1973, MBL (USA) Corporation has enjoyed continuous growth through the years. This growth and increasing demand for Mitsuboshi Belting’s quality products provided the base for construction of the Illinois Manufacturing Plant which began production in March, 1988.
MBL (USA) Corporation manufactures all types of V-Belts, V-Ribbed Belts, Timing Belts, and Variable Speed Belts for both original equipment and service parts in the automotive, recreational, and industrial markets. In addition to supplying North, Central and South America markets, products are exported to countries worldwide.
MBL (USA) has been the recipient of numerous quality and service swards from the world’s best companies. The consensus from our customers and visitors from major corporations around the globe has been that this plant is truly world class in all areas – technology, equipment, automation, process control and quality control.
Mitsuboshi maintains the highest quality standards and our domestic and overseas factories are ISO 9001 of ISO/TS 16949 quality certified, in addition to having ISO 14001 environmental certification. Shop for Mitsuboshi belts today.
SELAMAT DATANG DI WEBSITE PT. KARUNIA IMMANUEL SEJAHTERA